Jim Posted February 27, 2021 Share Posted February 27, 2021 All functions codes - Coding (VCDS) Control UNIT HERE Quote Link to comment Share on other sites More sharing options...
Jim Posted February 27, 2021 Author Share Posted February 27, 2021 Teardrop - prevention of additional wiping after spraying Coding: 09-Central electrics, coding-07 select RJ WISCHER, the code is displayed eg 00063477 2048 is subtracted from this number, the resulting code will be (eg) 00061429 Teardrop - rear wiper - after spraying and three wipes, an additional wipe follows Coding: 09-Central electricity, coding-07 code insert into LCode, in byte 3 check bit 5 Comfortable window closing in the rain- If the windows remain open in the rain, they should be tightened automatically when the ignition is switched off. (As of MR 2007, this function is already in Maxidot Settings) Coding: 46-Comfort system, encoding-07 code insert into LCode, in byte 9 check bit 2 After encoding, the item should appear at maxidot. from the VW forum: Then switch to the RLS unit in the central electrics and redo its coding. You have to add 4 to the second bit, so there you will have to be decimal 00208933, that is after the conversion to HEX 033025. So you will add to 03 here 4ku ... So it will be 073025 and you will redo it to decimal. It will be 00471077..Then code it and that's it. It should be active 20 minutes after locking the car. But if it didn't do anything after the rain, then you need to load the latest SW into the control units of all the doors. It should be TPL 2014232. Quote Link to comment Share on other sites More sharing options...
Jim Posted February 27, 2021 Author Share Posted February 27, 2021 RNS 510/ Columbus (1Z0 035 680 A) Byte 00 Radio Configuration I Bit 1 External CD Changer Connection active Bit 3 Parking Aid Monitoring inactive (Standard) Byte 01 Sound System Correction 00 Sound System not installed 01 Volkswagen Sound System 02 Skoda Sound System 05 Dynaudio Sound System Byte 02 Speaker Channels 00 Sound System (active Speakers) 02 2 Speaker Channels (Front only) 04 4 Speaker Channels (Front and Rear) Byte 03 Radio Configuration II Bit 1 Microphone Diagnostics active (Japan/China only) Byte 04 Treble Speaker Monitoring 01 Monitoring inactive 02 Front Monitoring active / Rear Monitoring inactive 04 Front and Rear Monitoring active Byte 05 Vehicle Specific Frequency Response 00 Volkswagen/Skoda (all) 01 Seat Altea (5P) 02 Seat Leon (1P) 03 Seat Toledo (5P) 04 Seat Altea XL (5P) Byte 06 Radio Configuration III 00 Standard/Not Relevant Byte 07 Navigation System Configuration I Bit 0 Multifunction Steering Wheel installed Bit 1 Voice Control inactive (NOT Japan/China) Bit 2 Speed Threshold for Destination Input active Bit 3 Speed Threshold for Speech Destination Input active Bit 4+5 Display Variant Byte 08 Navigation System Configuration II 00 Standard/Not Relevant Quote Link to comment Share on other sites More sharing options...
Jim Posted February 27, 2021 Author Share Posted February 27, 2021 Cruise control activation on EDC 17 (1.8 TSI, 2.0 TSI) Byte 00 Manufacturer 01 Audi 02 Skoda 03 Seat 04 Volkswagen Byte 01 Model 03 Audi A3 (8P) / Seat Altea/Toledo (5P) / Seat Leon (1P) / Skoda Octavia (1Z) / VW Golf (1K) 04 Audi A4 Limousine (8EC) / VW Passat (3C) 05 Audi A6 Limousine (4F2) 0C Audi A4 Avant (8ED) 0D Audi A6 Avant (4F5) 13 Audi TT Coupé (8J) 14 Audi A5 Coupé (8T) 1C Audi A4 Cabriolet (8H) / VW Eos (1F7) 23 VW Tiguan (5N) Byte 02 Market 00 Europe / Rest of World (RoW) 01 North America 02 Russia (GUS) / China 04 South Africa 08 Mexico / Taiwan / Korea Byte 03 Emissions 00 EU-II 03 EU-IV 06 USA LEV 0A USA ULEV II Byte 04 Transmission 02 Automatic Transmission "multitronic" (01J) 18 6-Speed Manual Tansmission 19 Automatic Transmission (09L) 1C 6-Speed Direct Shift Gearbox (DSG/02E) Byte 05 Special Functions I 03 Front-Wheel-Drive (FWD) / Climate Control not equipped 07 Front-Wheel-Drive (FWD) / Climate Control equipped 0C All-Wheel-Drive (AWD) / Climate Control not equipped 0F All-Wheel-Drive (AWD) / Climate Control equipped Byte 06 Special Functions II Bit 0 Cruise Control installed Bit 1 Adaptive Cruise Control (ACC) installed Bit 2 Suspension Levelling installed Bit 3 Trailer installed Byte 07 Cooling 18 1 Cooling Fan 20 2 Cooling Fans 60 2 Cooling Fans + Additional Water Pump For example 1.8 TSI coding, BZB engine without cruise control activated: 0203000318070060 and coding with cruise control activated 0203000318070160 PARTICULATE FILTER REGENERATION Engine 1.9 / 2.0 TDI Connect to an RJ engine Requirements: Ignition on Engine idling Cooling temperature min 50 ° C (Measured values 002.4) Particulate filter filled below the required value (measured values 075.3) If the filter is full above the required value, it must be replaced with a new one Appliances switched on (Lights, seat heating, Climate, etc.) Using the Encoding-ll function, enter code 21295, which starts the regeneration process. Group: 070 and 075 Measured values - regeneration 070.1: Regeneration status (xxxxxxxl = Normal regeneration active xxxxxxl x = Accelerated regeneration akrivni) 070.3: Regeneration counter 075.1: Exhaust gas temperature in front of the catalytic converter 075.2: Exhaust gas temperature in front of the particulate filter 075.3: filling the particulate filter 075.4: Exhaust gas temperature behind the particulate filter Driving test: Speed between 30-60km / h Speed 1500-2500 rpm Duration about 15-20 minutes Exhaust gas temperature above 700 ° C Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.